Sold Out

Thorens TD 125 MK II with Linn Basik LV X tonearm

The top quality Thorens 125 turntable with Linn Basik LV X tonearm.

This turntable is sold, but you can order the same. The only difference is that the wooden pattern could be a little bit different. We can also make an upgrade according to your wishes.
Pay safely with
Safe shopping
Worldwide shipping
Money-back guarantee

The Thorens TD 125 MK II is the high-end classic model from the early 1970s. It is a top quality instrument which will deliver incomparable musical performance and protect your records for years to come.

The player’s plinth is made from Beech wood. The tree is gently processed, toned and oiled with special furniture oil. The bottom of the plinth, made of 24 mm plywood, additionally damps parasitic resonances and vibrations without losing the natural harmonic richness of an analogue instrument. The whole structure is carried by 3 height adjustable spike foots with locknuts for better stability. These spikes enable to isolate the equipment from external vibrations in the environment.

The metal sub-chassis were damped with special acoustic material. This removes the specific metallic tinkle and also adjusts tonal balance to give a natural sound. The top surface is painted in black matte lacquer.

The platter bearing was cleaned of all the old oil and grease, and then oiled again with high quality oil especially recommended for this player’s bearing. The result of the bearing restoration is a more stable and smooth rotation and less mechanical noise.

The rubber drive belt was meticulously cleaned using only hot water and soap avoiding the use of any solvent which would have altered the elasticity of the rubber.

The player is upgraded with legendary “Linn Basik LV X” tonearm. It was selected in an already good condition.

The turntable is not equipped with a phono cartridge but it’s possible install any. We would recommend something like Nagaoka MP 150 (around €300), Ortofon Blue (around €180) or Bronze (around €300), Audio Technica At 150 MLX  (around €350). Installation and tuning is free of charge, and you can also just send us your cartridge.

The old cables were replaced with new audiophile high quality cables and gold plated RCA plugs. All of the soldering was done using audiophile silver solder WBT-0820 and flux X-M3 (no traces of adulterated alcohol).

The main platter disc is polished in matte and painted with lacquer to prevent tarnishing.

The small platter disc is made from metal and has a bigger bearing shaft diameter (then the usual small patter discs by Thorens 146, 160).

The new acrylic dust cover on hinges can be installed for additional €170.

The suspended sub-chassis will be tuned for use both with or without a stabilizer. The fully-loaded sub-chassis (platter, slipmat, vinyl and stabilizer) must be parallel to the supporting chassis. The stabilizer from the pictures cost an additional €40. You can also tell us your stabilizer weight and we will tune the sub-chassis for free.

The complete package includes digital scales (to adjust the cartridge tracking force), spirit level (to adjust the turntable level) and instructions for player and tonearm adjustment and tuning.


The shipping is not included. We will pack the turntable very carefully and securely, as if it were a crystal vase.

You may return the turntable within 14 days of arrival for a full refund, minus shipping charges. After 14 days and within one year, if a player has any problems, we can repair it for free or just for the cost of replaced parts, if replacement will be necessary.


For any questions and orders please contact us by e-mail or fill out the form below:

Your Email (required)

Your Name

Your Message


Linn Basik LV X


No cartridge


17 kg


48 x 36 x 21 cm

There are no reviews yet.

Be the first to review “Thorens TD 125 MK II with Linn Basik LV X tonearm”

Your email address will not be published. Required fields are marked *

  • No products in the cart.