This turntable is sold, but you can order the same. The only difference is that the wooden pattern could be a little bit different. We can also make an upgrade according to your wishes.
The Thorens TD 160 is the top classic model from the 1970s. It is a precision instrument which, with reasonable care, will deliver optimum reproduction quality and protect your records for years to come.
The player’s plinth is made from Beech wood. The tree is gently processed, toned and painted with 4 layers of matte varnish. The bottom of the plinth, made of plywood, additionally damps parasitic resonances and vibrations without losing the natural harmonic richness of an analogue instrument.
The whole structure is carried by 3 height adjustable spike foots with locknuts for better stability. These spikes enable to isolate the equipment from external vibrations in the environment.
Restoration
The metal chassis and sub-chassis were damped with special acoustic material. This removes the specific metallic tinkle and also adjusts tonal balance to give a natural sound.
The platter bearing was cleaned of all the old oil and grease, and then oiled again with high quality oil especially recommended for this player’s bearing. The result of the bearing restoration is a more stable and smooth rotation and less mechanical noise.
The player has an original Thorens TP16 MKII tonearm. It was selected in an already good condition, then it was restored and the bearing was cleaned. It’s also possible to upgrade the player with other higher level tonearm, like SME 3009, Jelco or other.
The tonearm is equipped with a used Audio Technica AT 95 E phono cartridge. It’s also possible to change it and install any other higher quality cartridge. We would recommend something like Nagaoka MP 110 (around 150 €) or MP 150 (around 300 €), Ortofon Blue (around 180 €) or Bronze (around 300 €), Audio Technica At 150 MLX (around 350 €). Installation and tuning is free of charge, and you can also just send us your cartridge.
The old cables were replaced with new audiophile high quality cables and gold plated RCA plugs. All of the soldering was done using audiophile silver solder WBT-0820 and flux X-M3 (no traces of alcohol).
The new acrylic dust cover on hinges can be installed for additional 180 €.
The suspended sub-chassis will be tuned for use both with or without a stabilizer. The fully-loaded sub-chassis (platter, mat, vinyl and stabilizer) must be parallel to the supporting chassis. The stabilizer from the pictures cost an additional 60 €. You can also tell us your stabilizer weight and we will tune the sub-chassis for free.
The main platter disc edge is polished in matte and painted with lacquer to prevent tarnishing.
The complete package includes instructions for record player and tonearm adjustment and tuning.
Details
The shipping is not included. We will pack the turntable very carefully and securely, as if it were a crystal vase.
You may return the turntable within 7 days of arrival for a full refund, minus shipping charges. After 7 days and within one year, if a player has any problems, we can repair it for free or just for the cost of replaced parts, if replacement will be necessary.
There are no reviews yet.